New, unused Funepoxy Mulch Glue landscaping binder. Spray-ready formula designed to hold mulch, gravel, pebbles, pine straw, and decorative stones in place. • Ready to use – no mixing • Helps prevent mulch shifting and erosion • Suitable for wood mulch, rubber mulch, gravel, and stones • Outdoor use • Net weight: 35 oz Item is exactly as shown in photos. BN17
Item Tag: FUNEPOXY
-
Crystal Clear Tumbler 1:1 Epoxy Resin 1 Gallon Kit – DIY Craft Jewelry Making
1 Gallon kit : 64oz resin A + 64oz hardener B (Total 1 Gallon). Always keep the bottles sealed when not in use. FDA Compliant / Food grade: Yes, in its inert fully cured state. Pour into the mixing cup.
-
Deep Pour 2:1 Epoxy Resin Supplier – 12kg/ 3 Gallons Kit – DIY Art Castings
Operation steps 2:1 ratio for A & B glue by weight Pour into the mixing cup Stir it evenly for 2-3 minutes Add glitter or pigment if you need, then stir it, standing 30-60s Slowly pour mixed resin down the mold Add other decorative Tips for operation each time the resin mixed with a thickness range of under 2″ in summer, 2-4″ in winter to avoid bursting. and you can go as deep as you like, just make sure to work in stages. stay under 2″- 4″ per pour. After the surface film cures begin your second pour. the surface set time is roughly 4 hours at room temp. Full cure time is 48 hours in Summer, 48-72 hours in Winter. Hardness range 80-85DDeep Pour Epoxy Resin Supplier – 12kg/ 3 Gallons Kit – DIY Art Castings 2:1 By Weight Low viscosity non ToxicThe resin specially designed with Low viscosity, convenient 2:1 mix ratio by weight, long pot life, room temperature curing system with great clarity and a high gloss finish. can deeper pour up to 2″-4″ one time in winter 12kg / 3 Gallons kit : 2 bottles 1 Gallon/128oz resin A + 1 bottle 1 Gallon/128oz hardener B (Total 3 Gallons / 12kg) Tips for operation each time the resin mixed with a thickness range of under 2″ in summer, 2-4″ in winter to avoid bursting.and you can go as deep as you like, just make sure to work in stages. stay under 2″- 4″ per pour. After the surface film cures begin your second pour.the surface set time is roughly 4 hours at room temp.Full cure time is 48 hours in Summer, 48-72 hours in Winter. Hardness range 80-85D This product cures to a brilliant high gloss finish. The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass. Formulated to meet a variety of applications. Perfect for tabletops, fiberglass work, small castings (under 4″), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs. Features:Mix Ratio……………2:1 by weightWork time …………..4-6 hoursHardness………………..D80-85Mixed Viscosity……….2000-3000cps.Chemical Resistance…….excellentMoisture Resistance……..excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per 4kg/1 Gallon at 1/8 inch thickness Operation steps2:1 ratio for A & B glue by weightPour into the mixing cupAlong the cup wall and bottom stir it evenly for 2-3 minutesAdd glitter or pigment if you need, then stir it, standing 30-60sSlowly pour mixed resin down the moldAdd other decorative APPROVED APPLICATIONS:WOOD & METAL COATINGTABLETOPSCRAFTSJEWELRY MAKINGHOBBYIST AND CRAFT MAKINGPLAQUES AND FRAMESCONCRETE AND PEBBLE COATINGFIBERGLASS WET LAY-UPWATERPROOFING & SEALING Important This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.PaymentShipping detailsReturn policyAbout usContact usPaymentWe accept Paypal,Google Pay,VISA,Master Card,American Express and Discover.Shipping detailsWe usually ship from US within 1-3 business days with tracking number by USPS or UPS.Return policy30 days returns. Seller pays for return shipping.About usWe are a trustworthy and professional eBay seller.Contact usIf any problems about our product and service,contact us for free at any time via eBay messages.BrandFUNEPOXYColorClearHandmadeYesHardness80-85DModelClear Epoxy ResinKit Volume2 Gallons epoxy resin A + 1 Gallon hardener BKit Capacity3 Gallons Total
-
Fast Cure 1:1 – Clear Epoxy Resin – 16.9oz/33.8oz/67.6oz/1.2 Gall/2.11 Gall Kit
Always keep the bottles sealed when not in use. 1:1 fast-cure resin (A ≥ B), mix s150ml total(75A +75B) perbatch. Slowly pour mixed resindown the mold. Always keep the lids tightly sealedwhen not in use.
-
100/300/500/1000g Fast Cure UV Resin Kit Super Clear Low Odor Jewelry DIY Crafts
Our UV resin hard is made of safe and non-toxic materials with self-leveling and self-off-gassing properties. After curing, it is Low Odor, crystal clear, non-stick, and non-yellowing. It can also be mixed with mica powder, colorants, glitter and sequins to create more brilliant colors.
-
Crystal Clear Epoxy Resin 1/2 Gallon 64OZ Kit – Self-Leveling – Fast Cure 1:1 AB
The resin 1:1 mix ratio by volume, 64oz kit is volume 64oz mixed, is the total volume 64oz kit : 32oz resin A + 32oz hardener B (Total 64oz) Features: Mix Ratio……………1:1 by volume Work time …………..45-60 minutes Hardness………………..D70-80 Mixed Viscosity……….2500-3500cps. Chemical Resistance…….excellent Moisture Resistance……..excellent FDA Compliant / Food grade: Yes, in its inert fully cured state Heat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed) Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Food Safe 1:1 Clear Epoxy ResinThe resin 1:1 mix ratio by volume, 64oz kit is volume 64oz mixed , is the total volume64oz kit : 32oz resin A + 32oz hardener B (Total 64oz) package weight : 5.4lbs Features:Mix Ratio……………1:1 by volumeWork time …………..45-60 minutesHardness………………..D70-D80 after full cure Mixed Viscosity……….2500-3500cps.Chemical Resistance…….excellentMoisture Resistance……..excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Perfect for tabletops, fiberglass work, small castings (under 1.2″ /3CM), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs. Operation steps1:1 ratio for A&B glue by volume (A can be 2-5% more than B to make harder)Pour into the mixing cupStir it evenly for 2-3 minutesAdd glitter or pigmentand if you need, then stir it, standing 30-60sSlowly pour mixed resindown the moldAdd other decorative Tips for operationThis product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2″ to avoid bursting.and you can go as deep as you like, just make sure to work in stages.stay under 1.2″ per pour.after the surface film cures begin your second pour.the surface set time is roughly 1 hour at room temp.the full cure time is 8-12 hours in summer and 12-24 hours in winterPaymentShipping detailsReturn policyAbout usContact usPaymentWe accept Paypal,Google Pay,VISA,Master Card,American Express and Discover.Shipping detailsWe usually ship from US within 1-3 business days with tracking number by USPS or UPS.Return policy30 days returns. Seller pays for return shipping.About usWe are a trustworthy and professional eBay seller.Contact usIf any problems about our product and service,contact us for free at any time via eBay messages.BrandFUNEPOXYColorClearHandmadeYesA:B Ratio1:1(volume ratio)Volume Kit64OZ Total
-
64oz Epoxy Resin Crystal Clear DIY Craft Jewelry Making No Bubble
The resin 1:1 mix ratio by volume, 64oz kit is volume 64oz mixed, is the total volume 64OZ kit : 32oz resin A + 32oz hardener B (Total 64oz) Features: Mix Ratio……………1:1 by volume Work time …………..45-60 minutes Hardness………………..D70-80 after full cure Mixed Viscosity……….2500-3500cps. Chemical Resistance…….excellent Moisture Resistance……..excellent FDA Compliant / Food grade: Yes, in its inert fully cured state Heat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed) Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness .
-
UV Resin Premixed 300g Clear Hard High Gloss Art DIY Epoxy Resin Crystal Kit
It can also be mixed with mica powder, colorants, glitter and sequins to create more brilliant colors. 【 Upgrade UV Resin Hard 】 ： The use of higher quality raw materials makes the UV light curing effect better.
-
Crystal Clear Epoxy Resin Kit -16oz/32oz/64oz/2 Gallons – Fast Cure 1:1 US Stock
Food Safe 1:1 Fast Cure Clear Epoxy ResinNote: the volume kit is the volume mixed , is the total volume, 1:1 mix ratio by volume 16 Oz kit : 8 Oz resin + 8 Oz hardener (Total 16 Oz ) 32 Oz kit : 16 Oz resin + 16 Oz hardener (Total 32 Oz ) 64 Oz kit : 32 Oz resin + 32 Oz hardener (Total 64 Oz ) 1 Gallon kit : 64 Oz resin + 64 Oz hardener (Total 1 Gallon) 2 Gallons kit : 1 Gallon resin + 1 Gallon hardener (Total 2 Gallons) Tips for operationThis product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2″ to avoid bursting.you can go as deep as you like, just make sure to work in stages.Stay under 1.2″ per pour.After the surface film cures begin your second pour. the surface set time is roughly 1 hour at room temp.the full cure time is 8-12 hours in summer and 12-24 hours in winterthe hardness range is 70-80D after full curePerfect for tabletops, fiberglass work, small castings (under 1.2″ /3CM), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs. Features:Mix Ratio……………1:1 by volumeWork time …………..30-45 minutesHardness………………..D70-80Mixed Viscosity……….2500-3500cps.Chemical Resistance…….excellentMoisture Resistance……..excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please dont leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Approved Applications: Wood & Metal Coating Concrete and Pebble Coating Table,bar tops Hobbyist,Jewelry and Craft Making Plaques and Frames Fiberglass wet lay-up Waterproofing & Sealing ImportantThis chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use.Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.
-
Clear Epoxy Resin 24oz/48oz 3kg 6kg 12kg/3 Gallons Kit – DEEP POUR 2A:1B 2″-4″
Operation steps 2:1 ratio for A & B glue by weight Pour into the mixing cup Stir it evenly for 2-3 minutes Add glitter or pigment if you need, then stir it, standing 30-60s Slowly pour mixed resin down the mold Add other decorative Tips for operation each time the resin mixed with a thickness range of 3-5cm in summer, 5-10cm in winter to avoid bursting. and you can go as deep as you like, just make sure to work in stages. stay under 2″- 4″ per pour. After the surface film cures begin your second pour. the surface set time is roughly 4 hours at room temp. Full cure time is 48 hours in Summer, 48-72 hours in Winter. Hardness range 80-85DDeep Pour Clear Epoxy Resin 750g/24oz 1.5kg/48oz 3kg/96oz 6kg/192oz 12kg/384oz Kit – 2:1 By Weight Low viscosity non ToxicOperation steps2:1 ratio for A & B glue by weightPour into the mixing cupStir it evenly for 2-3 minutesAdd glitter or pigment if you need, then stir it, standing 30-60sSlowly pour mixed resin down the moldAdd other decorative The resin specially designed with Low viscosity, convenient 2:1 mix ratio by weight, long pot life, room temperature curing system with great clarity and a high gloss finish. The resin 2:1 mix ratio by weight (Not by volume), can deeper pour up to 4″ one time in winter 750g / 24oz kit : 2 bottles 8oz resin A + 1 bottle 8oz hardener B (Total 24oz) 1.5kg / 48oz kit : 2 bottles 16oz resin A + 1 bottle oz hardener B (Total 48oz) 3kg / 96oz kit : 2 bottles 32oz resin A + 1 bottle 32oz hardener B (Total 96oz) 6kg / 192oz kit : 2 bottles 64oz resin A + 1 bottle 64oz hardener B (Total 192oz) 12kg / 3 Gallons kit : 2 bottles 1 Gallon resin A + 1 bottle 1 Gallon hardener B (Total 3 Gallons) Tips for operation each time the resin mixed with a thickness range of 3-5cm in summer, 5-10cm in winter to avoid bursting.and you can go as deep as you like, just make sure to work in stages. stay under 2″- 4″ per pour. After the surface film cures begin your second pour.the surface set time is roughly 4 hours at room temp.Full cure time is 48 hours in Summer, 48-72 hours in Winter. Hardness range 80-85D This product cures to a brilliant high gloss finish. The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass. Formulated to meet a variety of applications. Perfect for tabletops, fiberglass work, small castings (under 4″), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs. Features:Mix Ratio……………2:1 by weightWork time …………..4-6 hoursHardness………………..D80-85Mixed Viscosity……….2000-3000cps.Chemical Resistance…….excellentMoisture Resistance……..excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per 4kg at 1/8 inch thickness APPROVED APPLICATIONS:WOOD & METAL COATINGTABLETOPSCRAFTSJEWELRY MAKINGHOBBYIST AND CRAFT MAKINGPLAQUES AND FRAMESCONCRETE AND PEBBLE COATINGFIBERGLASS WET LAY-UPWATERPROOFING & SEALING Important This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.PaymentShipping detailsReturn policyAbout usContact usPaymentWe accept Paypal,Google Pay,VISA,Master Card,American Express and Discover.Shipping detailsWe usually ship from US within 1-3 business days with tracking number by USPS or UPS.Return policy30 days returns. Seller pays for return shipping.About usWe are a trustworthy and professional eBay seller.Contact usIf any problems about our product and service,contact us for free at any time via eBay messages.BrandFUNEPOXYColorClearHandmadeYesHardness80-85DModelClear Epoxy Resin